Ranch Fencing in Waco, TX

Fencing a pasture is a different job from fencing a backyard. Runs are longer, ground is rougher, and the fence has to hold animals, not just mark a line. JBP Fencing builds ranch fencing in Waco, TX and across McLennan County for landowners who need a fence that stays tight and keeps livestock where they belong. We work on small acreage outside Waco and on larger properties out toward China Spring, McGregor and Robinson.

Wire Fencing

Wire is the most common ranch fence because it covers a lot of ground for the money. Barbed wire on steel T-posts is the traditional choice for cattle. Field fence, also called woven wire, has a grid of horizontal and vertical wires that keeps in smaller animals like goats and sheep and helps keep dogs and other animals out. Welded wire works for smaller pens and garden areas. The right choice depends on what you are keeping in, what you are keeping out, and how often the fence will be checked. We talk through that with you on site before we recommend a wire type, a height and a post spacing.

Pipe and Railroad-Style Fencing

Pipe fence is welded steel pipe posts with pipe top rails, often with cable or wire between them. It is strong, it lasts, and it looks good along a road frontage or at the entrance to a property. Railroad-style fencing uses heavy posts and rails for the same kind of rugged ranch look. Because pipe fence is welded on site, it is a good fit for our in-house welding work, the same crew that builds our metal fences and custom gates. Pipe and wire combinations are common too: pipe along the front where it is seen, wire across the back pastures where cost per foot matters most.

Corners, Braces and Gates

A wire fence is only as tight as its corners. The wire is stretched between brace assemblies at the ends, corners and gate openings, and if those braces move, the whole run goes slack. We build H-braces and corner assemblies set firmly in the ground so the wire can be stretched tight and stay that way. On long straight runs we add line braces to keep tension even. This matters even more on the clay soils around Waco, which swell after rain and shrink in drought and will work loose any post that was not set properly.

Gates are where a ranch fence gets the most use. We hang pasture gates and wider gates for trucks, trailers and equipment, and we set the gate posts to carry the weight so the gate swings freely and does not drag after a season. Entry gates at the road can be paired with pipe fence for a finished look.

Clearing and Old Fence Removal

Many rural fence jobs start with an old fence that has to come out first: rusted wire, rotted wood posts, and brush grown into the line. We remove and haul off old fencing and clear vegetation along the fence line so the new fence has a clean, straight path. Clearing the line also makes the fence easier to walk and inspect later. If your existing ranch fence just needs work, our fence repair service can re-stretch wire, replace damaged posts and rebuild failing braces.

Planning a Ranch Fence

Before we quote ranch fencing in Waco, TX, we walk the line with you to look at terrain, creeks and draws, tree lines and access for equipment. Knowing where the property corners are is important on rural land, and a survey helps when a fence will sit on a boundary you share with a neighbor. You get a clear written quote that spells out the wire or pipe, the post type and spacing, the number of braces and the gates. We serve acreage throughout the area, including China Spring, McGregor and Robinson. You can also compare every option on our fence installation in Waco, TX page. For ranch fencing in Waco, TX, request a free estimate or call (254) 804-8264.